Epoxy Wet Coat
- Dura-Plate 154, Epoxy Based Coat (10 mils)
- Actolon 218 HS, Acrylic Polyurethane Top Coat (2-3 mils)
- Fans and Single Wall Plenums
High Build Epoxy Wet Coat
- Dura-Plate 154, Epoxy Based Coat (16 mils)
- Actolon 218 HS, Acrylic Polyurethane Top Coat (2-3 mils)
- Fans and Single Wall Plenums
Epoxy Powder Coat
- Valspar Epoxy Primer + Powdura (8-11 mils)
- Fans, Mono-Stack Fans and Single Wall Plenums
- Tiger Drylac (2.5-3.5 mils)
- Double Wall Plenums and HRUs
Higher Grade Acid
- Phenicon HS (9 mils)
- Fans with exposure to high acid environments
Higher Grade Acid/High Temp
- EpoPhen FF (7-9 mils)
- Fans and plenum with exposure to high temperatures (not to exceed 450°F/232°C) and high acid environments
High Temp
- Dampney Thurmalox 8200-0129
- High Temp fans with exposure to temperatures will exceed 200F/93C, Diesel Generator Exhaust
The Epoxy Powder-Coat/Epoxy Wet Coat options listed above are the standard coatings. These coatings are marine grade and will withstand most applications. If you are unsure if you need an upgraded coating, please consult with your RSM and/or the Applications Engineering team at Strobic Air.